MikroTik RouterBOARD 1100 Bedienungsanleitung PDF herunterladen (Seite 9)

RouterBOARD 1100/AH Series User's Manual

Primary Boot Loader

There are two boot loaders present on the NOR flash memory chip. Secondary is the main one, that is

executed by default. This is the one that can be upgraded. In case something goes wrong in the upgrade

process, or you have set some incorrect settings that render it unusable, you can load the Primary boot loader

by holding the Software Reset 1 button (S1), connecting the power, and then releasing the button/jumper. The

Primary boot loader has the default settings, which can not be changed. It is also not possible to upgrade it.

RouterOS functions

Health monitor

This menu shows the current fan status.

[admin@MikroTik] /system health> print

fan-mode: auto

use-fan: main

active-fan: auxiliary

voltage: 12V

current: 861mA

fan-speed: 9878RPM

temperature: 32C

cpu-temperature: 40C

power-consumption: 10.3W

RB1100AH doesn’t have any fans. All Fan options apply to RB1100Ahx2 only.

fan-mode – whether to use automatic fan failover (auto | manual; manual by default).

use-fan – which fan to use in manual mode (main | auxiliary; main by default).

The RB1100Ahx2 also features a fan RPM monitor and fan RPM control by CPU temp ( less noise ).

Firmware information

This menu displays RouterBOARD model number, serial number, the current boot loader version and the

version available in the current software packages installed.

[admin@MikroTik] > system routerboard print

routerboard: yes

model: "rb1100"

serial-number: "154201C1DD3C"

current-firmware: "2.27"

upgrade-firmware: "2.27"

[admin@MikroTik] >

The firmware version can be upgraded using “/system routerboard upgrade” command.

Firmware Settings

Boot loader settings are also accessible through this menu.

[admin@MikroTik] > system routerboard settings print

baud-rate: 115200

boot-delay: 2s

boot-device: nand-if-fail-then-ethernet

enter-setup-on: any-key

boot-protocol: bootp

enable-jumper-reset: yes

[admin@MikroTik] >

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

MikroTik RouterBOARD 1100 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung MikroTik RouterBOARD 1100